Road: alignment, section, earthwork volumes
Alignment, design profile, typical section and corridor are built with a single prompt; cut and fill volumes are calculated.
294.6 malignment
R = 120 mhorizontal curve
712.7 m³cut
12.8 m³fill
What the program did
- Drew the alignment and the design profile.
- Built the corridor with the typical section with kerbs from the library.
- Calculated the cut and fill volumes; reported the result of the KGM (General Directorate of Highways) check.
- Showed the corridor in the 3D view.
What the engineer approved
- Gave the horizontal curve radius and the design speed in the prompt.
- Chose the typical section from the library.
Full video
This demo is cut from the video below. The link starts the video at the same point.
