Cross-section sheet and quantity take-off
The section of every station is arranged on the sheet; cut, fill and quantity items come out of the same model.
78cross-sections
20 msection spacing
4sheet columns
What the program did
- Drew sampling lines at 20 m spacing, 30 m wide to the right and to the left.
- Arranged the 78 sections on a four-column sheet; wrote the cut and fill area in each cell.
- Calculated the cut, fill and net volume.
- Produced the guard rail, kerb and filter items from the same model.
What the engineer approved
- Gave the section spacing and width, and showed the position of the sheet.
- Chose the corridor section as the source of the earthwork volumes.
Full video
This demo is cut from the video below. The link starts the video at the same point.
