Compliance check: from red to green
The landscape rule set checks the drawing and marks the narrow footpath in red. After the correction the second check comes out clean.
12rules checked
5non-compliances found
1.80 mnew footpath width
0non-compliances in the second check
What the program did
- Checked the drawing against the landscape rule set.
- Marked the 1.20 m wide footpaths in red because they fall below the 1.50 m limit.
- Widened the footpaths to 1.80 m and checked again: 10 compliant, 0 non-compliant.
What the engineer approved
- Chose which rule set to apply.
- Decided the new width of the footpath.
Full video
This demo is cut from the video below. The link starts the video at the same point.
